This summary is not available. Please
click here to view the post.
Read More
2021-02-01
Subscribe to:
Posts (Atom)
Popular Posts
-
On this tutorial we will configure QoS or traffic shaping on the mikrotik router. Ether1 was already configured for WAN and ether2 was conf... -
1. Configure the first router for your first ISP. Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router... -
Step 1 Choose a port on a switch to limit the bandwidth. Step 2 Set the bandwidth of the port. Use bandwidth command to set the bandwi... -
Switch> Switch>enable Switch# Switch#conf t Switch(config)#no logging console Switch(config)#no ip domain lookup Switch(config)#...
-
1. Enable IP routing on the switch. Switch#conf t Switch(config)# ip routing 2. Create a VLAN. Switch(config)#vlan 10 Switch(config...
-
1. Configure Access List for each IP address or Network. 2. Apply a Class - Map for each access-list. 3.Setup a Policy-Map. 4.Ap... -
Configure WAN on ethernet1 port of the router. 1.Navigate to IP > Addresses. Address List box will pop up. 2. Click the plus sign (+). ... -
This is the basic configuration for your Cisco router.Access your router and type the following commands. Router> Router>enab...